Radio LED Controller Mini - small helper for big light moments

The iluminize radio controller harmonizes perfectly with LED lamps and luminaires that have the following features: they are dimmable at constant voltage between 12V and 36V and they can be dimmed with pulse width modulation (PWM). The voltage is determined by the power supply and the voltage must match the LED voltage. Example: a 12V LED strip light may only be operated with a 12V power supply.

If the mentioned requirements are fulfilled, our controller is suitable for

• LED light strips

• LED built-in spotlights
  

• LED built-in stair lights
  

• LED furniture built-in lights
  

• LED-panels

Did you know? If you disconnect the controller from the power supply, it will remember the last setting the next time you switch it on!
 

Powerful

Our compact LED controller has one channel with 8A and allows the connection of single-color LEDs. Depending on the input voltage, the maximum wattage varies.

 

A little tip? A coupling with simple GU5.3 MR16 illuminants is unfortunately not possible. However, if these can be dimmed at a constant voltage between 12V - 36V via PWM method, nothing stands in the way of your smart project.
 

Additional function: Optional pushbutton switches can be connected. The installation offers further advantages, but should be done according to the wiring diagram. Thus, possible errors, such as connecting to 230V, can be avoided.

The iluminize control system

The LED controller is coupled with up to 8 radio remote controls from the iluminize control system. You can choose between hand-held remote controls, wall dimmers or desk dimmers. However, the Radio remote controls work independently, but share scenes. This means that a scene saved with the remote control under S1 works in exactly the same way on, for example, the likewise coupled wall dimmer.