Wireless wall dimmer with switches - create your own ambience with targeted clicks

Our wall dimmers bring your lighting ideas to life in a simple way with just a few clicks. Design your light very simple and user-friendly thanks to our wireless wall dimmer with switches. The operation is self-explanatory and the installation is done quickly. The cream-colored light switch brings visually a lot and also makes a good figure in multiple flush-mounted boxes.

Stepless dimming

By pressing the dim button for a longer time, all RGB colors are dimmed simultaneously between 0.1% and 100% brightness. The stepless adjustment of the white LEDs is done with the W-button. Synchronous dimming can be performed by any number of LED systems.

The perfect white tone

Find your ideal mixed white and choose between warm, neutral and cool white. The button for mixed white creates all three white tones by mixing the RGB components. You can then dim them via the W button.

Personal color mix

Create a feel-good oasis with your own color accents and bring warmth into your living spaces in an artistic way. Adjusting the color is as simple as pressing the RGB button. The color tones are obtained from the primary colors and generated in a fluid transition. A colorful variety is offered by 10 pre-installed color change programs, whose speed can be adjusted and is only available for the Color & White variant.

Up to 4 zones controllable

The control is possible synchronously as well as individually for up to 4 zones. So you can control single zones separately or all zones at the same time. Integrate any number of LED systems per zone and operate them synchronously.

The wall dimmer used decides dynamically during use in which operating mode the wireless controller works. 

Memory function

Switching on/off is done with a slight time delay without flickering and is therefore easy on the eyes. Each time it is switched on, the last set lighting situation is restored.

Generous range

The operation with a wireless controller is guaranteed thanks to the decent range. This is depending on the condition of the room up to 20m and thus allows flexible lighting control. The wall dimmer operates in the approved frequency band 868 MHz and is powered by batteries.

Available functions

LED design by radio offers you many advantages and possibilities. Thanks to the right combination of LED controller and this wall dimmer, no wishes remain unfulfilled. However, there are also limitations that need to be considered:

5041.115 Radio wall dimmer with switches for white LEDs

5041.415 Radio wall dimmer with switches for Color & White LEDs

Dim = with dimming function / Sw = switching on and off / Mix = mixing of color tones / W-Mix = mixing of white tones / Prog = calling up 10 color change programs

Cream white framed

The wall dimmer impresses with a creamy white frame that complements well with warm white shades. With the rounded edges, it comes visually elegant and stylish and makes a good figure on walls as well as other surfaces.

The iluminize radio system

To dim or switch your LEDs, the wall dimmer must first be paired with a compatible radio controller. Thus, the wall dimmer communicates as a radio transmitter with the LED controller and can be operated with up to 8 wireless controllers in parallel.

Installation & Mounting

The wall dimmer is battery operated and therefore does not require a power connection. The included batteries have a long life (up to 2 years) and are easily replaceable. Please remove the protective film from under the battery before use. Given the protection class of IP20, operation is intended for indoor use only.

Our wireless wall dimmer can be easily glued or screwed on surfaces with the included 3M sticker. It can also be easily mounted on standard flush-mounted boxes. The inner part can be removed from the frame and inserted into one of the following standard switches.

Scope of delivery

With the delivery you get:

• 1 x wall dimmer
  

• 1 x frame 

• 1 x mounting plate
  

• 1 x battery (button cell CR2032 / 3V)
  

• 1 x 3M sticker
  

• 2 x screws
  

• 1 x instruction manual