The adjustable radio LED controller - best equipped for operation with different currents

The iluminize radio controller harmonizes perfectly with LED lamps and luminaires that bring the following: they are dimmable at constant current between 250mA - 1500mA and they can be dimmed with pulse width modulation (PWM). The voltage is determined by the controller and must match the LED voltage. Example: a 48V LED panel may only be operated with a 48V power supply.

If the mentioned requirements are fulfilled, our controller is suitable for

• LED built-in spotlights
  

• LED built-in stair lights
  

• LED furniture built-in lights
  

• LED-panels

Did you know? If you disconnect the controller from the power supply, it will remember the last setting the next time you switch it on!

Flexible Ströme

The core of our controller is a crucial factor: flexible output currents! The current is adjustable and the LED controller is connected directly to the 230V mains! Thus, spots and panels can be operated with the different currents, up to a max. output power of 50W ("mouse piano").

Additional function: Optionally it is possible to operate the LED controller via push buttons from your normal electrical installation series. Both on/off (short button operation) and dimming (long button operation, alternating brighter / darker) are possible. The voltage can be 8-230V and is therefore compatible with a large number of pushbuttons.

The iluminize control system

The LED controller is coupled with up to 8 radio controls from the iluminize control system. The following are available for selection
Hand-held remote controls, wall dimmer or desk dimmer. However, the radio controls work independently, but share the scenes. This means that a scene saved with the remote control under S1 works in exactly the same way on, for example, the wall dimmer that is also coupled.