DMX Decoder Premium - broadly positioned with many adjustable functions

When it comes to digital lighting control for stage and event technology, a flawless performance is more than desirable. Our DMX decoder offers exactly the necessary reliability for an individual lighting design in your four walls. Due to its versatile functions and numerous connections it comes along optically a bit complex, but inside slumbers a user-friendly LED controller with many helpful extras. Benefit from this bundle of energy and dim your white and colorful LEDs as desired.

If your LEDs have the following, nothing stands in the way of your unlimited illumination: they are dimmable at a constant voltage between 12V and 24V and they can be dimmed with pulse width modulation (PWM). The voltage is determined by the power supply and the voltage must match the LED voltage. Example: a 12V LED strip light may only be operated with a 12V power supply.

If the mentioned requirements are fulfilled, our DMX decoder is suitable for

• LED light strips

• LED built-in spotlight

• LED built-in stair lights

• LED furniture built-in lights

• LED-panels

Compatible wall dimmer required

To be able to mix, dim or switch your LEDs, the DMX decoder needs to be paired with our
 DMX & radio wall dimmer. The wall dimmer decides about the respective color mode and the assignment of the 5 outputs. The DMX decoder sets the color and brightness of the LEDs selected by you on the wall dimmer via the respective current components.

Warm white, cool white, color or all in one? Depending on the assignment of the channels, you have many options and gain a colorful variety. With the wall dimmer you can operate your LED light strips as follows.

Did you know? If you disconnect the DMX-LED controller from the power supply, it remembers the last setting the next time you switch it on!

RDM compatible! The DMX decoder supports RDM and offers over 10 different RDM PIDs.

Powerful

Our robust DMX decoder has five channels with 8A and allows the connection of single color as well as colorful LEDs. Depending on the input voltage, the maximum wattage varies. 

Adjustable functions

Our LED controller with DMX512 signal convinces with many adjustable functions. This plus point makes it enormously valuable and versatile. So you operate your lighting flexible and adapt to new requirements quickly.

• adjustable PWM frequency (500Hz - 30kHz)

• adjustable dimming curve/gamma curve (logarithmic or linear)

• adjustable addresses (max. 512 addresses)

• adjustable channels

• adjustable bits (8bit/16bit)

Once all settings are done and all addresses are set specifically, a visible success awaits you. Thanks to the right PWM frequency, e.g. slow motion recordings up to 500 frames/s can be recorded without quality problems. 

Connections

The DMX decoder is operated by cable and therefore comes with different connection options. These offer you a secure and fast connection.

• 2 x RJ-45 socket in/out (LAN)

• 2 x XLR-3 or XLR-5 sockets in/out (male/female, 3-pin or 5-pin)

• div. DMX cable clamps

Create a serial DMX chain

DMX is a wired bus system that can be easily extended. Connect several DMX devices one after the other and expand your stage set effectively. Depending on the total length of the signal cables, it may be necessary to use a terminating resistor at the last DMX device in the chain. The DMX terminating resistor is quickly installed and also available from us. 

Scope of delivery

With the delivery you get the following listed components. The compatible DMX wall dimmer must be purchased separately.

• 1 x DMX decoder

• 1 x instruction manual