LED switch mini with door sensor - control your LED cabinet lighting automatically

For the simple control of your LED cabinet lighting you can do without a light switch or hand movement. Here, a highly sensitive door sensor takes over the work and makes everyday life in the home much easier. The iluminize LED switch Mini controls your LED light strips and spots automatically, which has certain advantages. For operation, your LEDs must meet the following requirements:

• dimmable via pulse width modulation (PWM)

• operation with constant voltage (12V-36V)

• they are single color LEDs (e.g. white)

light control by door movement

Each opening or closing of the door generates the decisive movement for the door sensor. As in the case of a refrigerator, each opening turns on the light and each closing turns it off.

Precise thanks to IR sensor

The infrared sensor (IR) has a highly sensitive detection range of 1-6 cm. This detects every movement even in the dark, so precise use is possible even in closets.

Powerful

The LED switch has an output of 8A and operates at a constant voltage (24V). The maximum wattage of the connected LEDs, lamps and lights may be 288W.

IP20

The LED switch as well as door sensor may only be used indoors. Both components must be protected from high humidity and pollution.

Installation & Mounting

Our iluminize LED switch mini with door sensor is available in a small and compact format. So you are flexible in the installation and can simply let the switch disappear. For the power supply and the operation of your 24V LED light strips you need a 24V power supply. The connection is made via only two cables.

The sensor can be installed in various surfaces with little effort. For this, a drill hole with ∅17mm is enough to sink it discreetly afterwards. With the enclosed nut (hexagonal) you fix the sensor at the desired location. Finally, the sensor and switch are connected with a connection cable (3-pin).

Scope of delivery

With the delivery you get the following components:

• 1 x LED switch mini

• 1 x IR sensor with connection cable (100cm)

• 1 x instruction manual (ENG)