Zigbee wall dimmer with plexiglass buttons - universally set up for white and color LEDs

Control your LED light installations cleverly in the glass design and tune your LEDs individually according to your wishes. Here you benefit from a user-friendly interface behind which a variety of smart functions slumber. The wall dimmer is suitable for the operation of white as well as colorful LED light strips, LED built-in spotlights, LED panels and other dimmable lamps and lights. 

Compatible Zigbee coordinators

Our wall dimmer communicates via Zigbee and thus addresses many coordinators such as Philips Hue. Pairing with the Philips Hue Bridge gives you a comprehensive and orderly integration of many LED lamps. Other coordinators following the Zigbee standard are also possible. We cannot guarantee the operation. Please contact the manufacturer of the respective coordinator.

• Amazon Echo Dot (from 4th generation)

• Osram Lightify

• Google Assistant

• and many more

Stepless dimming

Using the dimming icon you can freely select the brightness between 0.1% and 100%. You can dim all three colors brighter or darker at the same time. Thanks to separate buttons, color and color temperature can be adjusted effortlessly.

Find your white tone

Use the C/W button to select your favorite mixed white and choose between warm, neutral and daylight white. The individual white tones are adjusted by pressing or holding the C/W button.

Personal color mix

Create a feel-good oasis with your own color accents and bring warmth into your living spaces in an artistic way. By pressing and holding the Color button, you can intuitively define your desired color. Fresh and pleasant mixed colors are created with a mix of RGB. The color setting is synchronized and for any number of LED systems within a zone.

The wall dimmer used decides dynamically during use in which operating mode the radio controller or DMX decoder works.

Memory function

Switching on/off is slightly delayed without flickering and is therefore easy on the eyes. Each time the device is switched on, the last set lighting situation is restored.

Sufficient range

The operation with a Zigbee controller is guaranteed thanks to the decent range. This is up to 30m, depending on the nature of the room, and thus allows flexible lighting control. The wall dimmer operates in the approved frequency band 2.4 GHz and is powered by batteries.

Available functions

LED design by Zigbee offers you many advantages and possibilities. Thanks to the right combination of LED controller and this wall dimmer, no wishes are left unfulfilled. However, there are also limitations that need to be considered:

5140.011 Zigbee wall dimmer with plex glass switches Universal

Framed in plexiglass

The wall dimmer impresses with a pure white frame made of robust Plexiglas. With its rounded edges, it looks elegant and stylish and cuts a fine figure on walls and other surfaces.

The iluminize Zigbee network

Control via Zigbee network expands your LED lighting design many times over. Here, capable lamps and luminaires are integrated into your smart home in order to be able to assign and configure them as desired. For example, you can integrate up to 30 LED controllers and actuators including their lights and control them with a robust radio frequency of 2.4 GHz.

The flexible wall dimmer can be paired either directly with a compatible controller (see table) or via app. You may also connect several wall dimmers to one controller and in this way operate different LED light strips separately.

Installation & mounting

The wall dimmer is battery operated and therefore does not require a power connection. The included batteries have a long lifetime (up to 2 years) and are easily replaceable. Please remove the protective film under the battery before commissioning. Given the protection class of IP20, the operation is intended only for indoor use.

Our radio wall dimmer can be easily glued or screwed on surfaces with the included 3M sticker. It can also be easily mounted on standard flush-mounted boxes. The inner part can be removed from the frame and inserted into one of the following standard switches.

Scope of delivery

With the delivery you get:

• 1 x wall dimmer

• 1 x plexiglass frame

• 1 x inner plate

• 1 x mounting plate

• 2 x switching rockers

• 1 x battery (button cell CR2430 / 3V)

• 1 x 3M sticker

• 2 x screws

• 1 x instruction manual